‘great service from simple to complex orders, problem solving, schedule changing and delivering over and above at short notice’

Medical Customer - Healthcare Industry

  • Sourcing from our approved suppliers list
  • Full traceability provided
  • Certificates of Conformities available when requested
  • Certificates of Analysis available when requested

As we provide products to a wide range of sectors, we commonly have requests to produce from our non-standard stocked material. If you can’t see a product on our website or have a specific material in mind: please get in touch.

As we have been established for over 25 years, we have developed strong working relationships with our UK and international suppliers who work with us to provide a quick turnaround and high-quality specialist materials as per our customers requirements in keeping with our ISO 9001:2015. Below are some of our most frequently stocked specialist raw materials.

Graphite sheeting

Panasonic PGS thermal graphite sheet is a very thin, synthetically-made, highly oriented graphite polymer film manufactured for thermal management/heat-sink applications. With excellent thermal conductivity (2 to 4 times that of copper), Panasonic ‘s PGS thermal graphite sheets are flexible (withstand repeated bending) and can be cut into customized shapes. PGS has high thermal conductivity, is energy-saving (does not use electricity) and is environmentally friendly (pure carbon). It is Lightweight, flexes easily and is readily cut into custom shapes. PGS material is stable up to about 500°C and provides electro-magnetic shielding.

Foil rollstock

Foil is used in the manufacturing of pouches and header bags for items with specific barrier requirements. It is predominately medical grade material which meets the requirements of EN ISO 11607-1:2006. It has good moisture, gas barrier and UV resistant properties and it also can be heat sealed to itself and other flexible films over a wide temperature range- our state-of-the-art Sysco machinery has this capability that we avail of on a monthly basis for one of our long-standing medical device manufacturing customers.

Novus 30

Novus 30 is a good quality compressed sheet material based on a blend of aramid and inorganic fibres with a nitrile rubber binder system. Novus 30 is a general-purpose material suitable for use in a wide range of applications, including hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals. We stock this in 1mm, 1.5mm, 2mm, 3mm,and 4mm thick in sheets size’s of 1.5m wide x 1.5m long.

Nomex 410

Nomex410 is a family of insulation papers that offer high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex® 410, the original form of Nomex® paper, is widely used in a majority of electrical equipment applications. We stock this in 0.13, 0.18 and 0.25mm thick in 914mm wide rolls.

Thermal Interface sheet

Thermal interface sheet is a high performance ultra-soft thermally conductive gel gap filler which is designed to fill the air gap between uneven surfaces. Thermal gap filler pads and gels provide a thermal interface between heatsinks (devices or substances for absorbing unwanted or excess heat) and electronic devices. They’re particularly useful where air gaps, rough surface textures or uneven surface topography prevent the use of traditional grease or paste.

It has good thermal conductivity, high compressibility, a Low hardness (Shore 00) and is great for electrical insulating.

Data Sheets

Most of our specialist materials can be supplied in varying thicknesses & lengths depending on our customers requirements, please use below for standard sizes only.

Material gradeSheet size Thicknesses available

Sil-pad 400

305mm x 305mm0.178mm

Thermal interface gel sheeting

150mm x 150mm0.5mm – 2mm

Mica Plastic Film

304mm x 200mm0.2mm, 0.5mm & 1mm

Graphite sheet

1.5m x 1.5m0.5mm up to 5mm

Gap Pad

203.3mm x 406.4mm0.508mm up to 3.175mm

Thermal insulation material

1.2m x 25m4mm thick

Gasket paper

0.25mm thick

Klinger gasket material

500mm wide x 750mm long

1.5m wide x 2m long

0.25mm up to 4mm thick

Nomex material

0.914m wide x 5m long

0.914m wide x 50m long

0.914m wide x 100m long

0.05mm up to 0.78mm thick
Novus 30

Gasket material

1m wide x 1.5m long up to 2m long0.4mm up to 6mm thick
Novus 34

Gasket material

1m wide x 1.5m long up to 2m long0.25mm up to 6mm thick

Silicone thermal gap pad

200mm wide x 300mm long0.5mm up to 3mm thick

Vulcan 35 – 65 shore hardness

250mm wide x 500mm long19.5mm thick & 39mm thick in stock

Non ceramic mill board

1m wide x 1m long3mm & 10mm thick

Want to know more? Request a call back:

"*" indicates required fields

This field is for validation purposes and should be left unchanged.


Our mission is to set the highest standards for everything we produce.