Specialist materials

‘always a quick response to any quotes requested. Orders always checked and confirmed before production’

Eileen - Electronics Industry

Sourcing from our approved suppliers list
Full traceability provided
Certificates of Conformities available when requested
Certificates of Analysis available when requested

As we provide products to a wide range of sectors, we commonly have requests to produce from our non-standard stocked material. If you can’t see a product on our website or have a specific material in mind: please get in touch.

As we have been established for over 25 years, we have developed strong working relationships with our UK and international suppliers who work with us to provide a quick turnaround and high-quality specialist materials as per our customers requirements in keeping with our ISO 9001:2015. Below are some of our most frequently stocked specialist raw materials.

Graphite sheeting

Panasonic PGS thermal graphite sheet is a very thin, synthetically-made, highly oriented graphite polymer film manufactured for thermal management/heat-sink applications. With excellent thermal conductivity (2 to 4 times that of copper), Panasonic ‘s PGS thermal graphite sheets are flexible (withstand repeated bending) and can be cut into customized shapes. PGS has high thermal conductivity, is energy-saving (does not use electricity) and is environmentally friendly (pure carbon). It is Lightweight, flexes easily and is readily cut into custom shapes. PGS material is stable up to about 500°C and provides electro-magnetic shielding.

Foil rollstock

Foil is used in the manufacturing of pouches and header bags for items with specific barrier requirements. It is predominately medical grade material which meets the requirements of EN ISO 11607-1:2006. It has good moisture, gas barrier and UV resistant properties and it also can be heat sealed to itself and other flexible films over a wide temperature range- our state-of-the-art Sysco machinery has this capability that we avail of on a monthly basis for one of our long-standing medical device manufacturing customers.

Novus 30

Novus 30 is a good quality compressed sheet material based on a blend of aramid and inorganic fibres with a nitrile rubber binder system. Novus 30 is a general-purpose material suitable for use in a wide range of applications, including hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals. We stock this in 1mm, 1.5mm, 2mm, 3mm,and 4mm thick in sheets size’s of 1.5m wide x 1.5m long.

Nomex 410

Nomex410 is a family of insulation papers that offer high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex® 410, the original form of Nomex® paper, is widely used in a majority of electrical equipment applications. We stock this in 0.13, 0.18 and 0.25mm thick in 914mm wide rolls.

Thermal Interface sheet

Thermal interface sheet is a high performance ultra-soft thermally conductive gel gap filler which is designed to fill the air gap between uneven surfaces. Thermal gap filler pads and gels provide a thermal interface between heatsinks (devices or substances for absorbing unwanted or excess heat) and electronic devices. They’re particularly useful where air gaps, rough surface textures or uneven surface topography prevent the use of traditional grease or paste.

It has good thermal conductivity, high compressibility, a Low hardness (Shore 00) and is great for electrical insulating.

Material grade	Sheet size	Thicknesses available
507-5605 Sil-pad 400	305mm x 305mm	0.178mm
707-4761 Thermal interface gel sheeting	150mm x 150mm	0.5mm – 2mm
785-0815 Mica Plastic Film	304mm x 200mm	0.2mm, 0.5mm & 1mm
AF280G Graphite sheet	1.5m x 1.5m	0.5mm up to 5mm
BER-366-ND Gap Pad	203.3mm x 406.4mm	0.508mm up to 3.175mm
Bubblefoil Thermal insulation material	1.2m x 25m	4mm thick
Gaskite025 Gasket paper		0.25mm thick
GC4430 Klinger gasket material	500mm wide x 750mm long 1.5m wide x 2m long	0.25mm up to 4mm thick
NX410 Nomex material	0.914m wide x 5m long 0.914m wide x 50m long 0.914m wide x 100m long	0.05mm up to 0.78mm thick
Novus 30 Gasket material	1m wide x 1.5m long up to 2m long	0.4mm up to 6mm thick
Novus 34 Gasket material	1m wide x 1.5m long up to 2m long	0.25mm up to 6mm thick
R-410-300 Silicone thermal gap pad	200mm wide x 300mm long	0.5mm up to 3mm thick
VUL50 Vulcan 35 – 65 shore hardness	250mm wide x 500mm long	19.5mm thick & 39mm thick in stock
X203-5133 Non ceramic mill board	1m wide x 1m long	3mm & 10mm thick

At Cutting industries we stock a varied range of materials suitable for a wide range of industries we bring in thickness to suit specific customer requirements when needed – however there may be times when we need to source and stock specialist materials that we don’t otherwise stock.

Graphite sheeting

Foil rollstock

Novus 30

Nomex 410

Thermal Interface sheet

Data Sheets

Want to know more? Request a call back:

Browse our selected case studies
and learn more about our products

Industries

Graphite sheeting

Foil rollstock

Novus 30

Nomex 410

Thermal Interface sheet

Data Sheets

Want to know more? Request a call back:

Browse our selected case studies and learn more about our products

Industries

Browse our selected case studies
and learn more about our products